卫星导航基带二次载波剥离跟踪技术
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TN967

基金项目:


Technology of Second Carrier Discards Tracking for Satellite Navigation Base-Band
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对现代卫星导航接收机及 OEM 板低功耗、待机长等需求,本文提出一种卫星导航基带二次载波剥离跟踪技术。首先剥离原始中频,然后对残余载波进行跟踪。该技术可大幅度降低基带数据速率,减小数据量,在 FPGA 上实现时,复用单个跟踪通道即可完成对 16 颗卫星信号的实时跟踪。实验结果表明,二次载波剥离跟踪技术较传统跟踪技术节省了 30%的硬件资源, 且可达到以下性能指标:跟踪灵敏度-139dBm,伪距测量精度 0.5m,载波相位精度 0.01m。

    Abstract:

    For the demand of low power and long standby in modern satellite navigation receiver and OEM board, a new technology of second carrier discard tracking for satellite navigation base-band is presented in this paper. Firstly, the original mid-frequency was discarded, and then the remaining carriers are tracked. The technology can greatly reduced the rate and sum of the base-band data. On FPGA realization, one tracking channel can track 16 satellites at the same time. The experimental result proves that the second carrier discard tracking technology can save 30% resources compare with the traditional tracking technology, it can achieve the following performance index: tracking sensitivity to 139dBm, the measure precision of pseudo-range to 0.5m, the precision of carrier phase to 0.01m.

    参考文献
    相似文献
    引证文献
引用本文

钟小敏,刘敏行.卫星导航基带二次载波剥离跟踪技术[J].现代导航,2016,7(6):401-404

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2022-05-17
  • 出版日期:
文章二维码